Short Answer
Natural harmonics are high-pitched, bell-like tones produced on string instruments by lightly touching the string at specific nodal points—such as the 12th, 7th, or 5th fret—rather than pressing it fully against the fretboard. This technique isolates individual overtones from the harmonic series, yielding ethereal, flute-like sounds that have become a staple in genres ranging from classical to rock and metal.
| Category | Guitar Technique / String Instrument Technique |
| Difficulty | Intermediate |
| Related Terms | Artificial harmonics, pinch harmonics, tap harmonics, overtone series, fundamental frequency, node |
| Common Keys/Instruments | Acoustic guitar, electric guitar, classical guitar, violin, cello, double bass |
Etymology / Origin
The word “harmonic” traces back to the Greek harmonikos, meaning “skilled in music” or “musical.” The concept of overtones has been understood since antiquity, with Pythagoras reportedly experimenting with divided strings to explore consonant intervals. However, the deliberate use of natural harmonics as a performance technique emerged more prominently with the violin family in the Baroque era. Composers like Jean-Philippe Rameau and later Niccolò Paganini exploited harmonics for their shimmering quality. On the guitar, natural harmonics gained traction in the 19th century through classical virtuosos such as Francisco Tárrega, and later became a hallmark of modern acoustic and electric guitar styles.
How It Works
When a string is plucked, it vibrates not only at its fundamental frequency (the note you hear most prominently) but also at integer multiples of that frequency—these are called overtones or harmonics. The fundamental corresponds to the full length of the string, while the overtones correspond to fractional divisions: 1/2 the string length produces the 2nd harmonic (octave), 1/3 produces the 3rd harmonic (octave plus a fifth), 1/4 produces the 4th harmonic (two octaves), and so on. These divisions occur at specific points along the string called nodes, where the string’s vibration is minimal for that particular harmonic.
By lightly touching the string exactly at a node (e.g., directly above the 12th fret), you prevent the fundamental and other harmonics that do not have a node at that point from sounding. The result is a pure, bell-like tone that corresponds to the harmonic whose node you are touching. The most commonly used natural harmonics on guitar are found at the 12th, 7th, and 5th frets, but others exist at the 4th, 3rd, and even 2nd frets, though they are quieter and require precise technique.
Notation & Diagrams
In standard notation, natural harmonics are indicated by a small circle above the note or a diamond-shaped note head. Sometimes the abbreviation “harm.” is written above the staff. In guitar tablature, harmonics are typically shown with the fret number enclosed in angle brackets, e.g., for the 12th-fret harmonic. Some tablature also includes the string number and the sounding pitch. For example, the harmonic at the 12th fret of the low E string produces the same E note one octave higher, often notated as on the 6th string. A simple chord chart for common harmonics might look like this:
E|------------| B|------------| G|------------| D|------------| A|------------| E|------------|
While not a true diagram, this tab snippet illustrates the positions for the most common natural harmonics across all strings.
Step-by-Step / How to Play
- Position your fretting hand: Lightly place your finger directly over the fret wire (not between frets) at the 12th, 7th, or 5th fret. Use the pad of your finger, not the tip, and apply only enough pressure to touch the string without pressing it down to the fretboard.
- Pluck the string: With your picking hand, pluck the string firmly and cleanly. For a clearer harmonic, pluck closer to the bridge, which excites more high-frequency overtones.
- Lift immediately: As soon as the string is plucked, lift your fretting finger off the string. This allows the harmonic to ring freely. If you keep your finger on, the note will be muted.
- Experiment with picking hand placement: The position of your picking hand along the string also affects which harmonics are emphasized. Plucking near the 12th fret can produce a rounder tone, while plucking near the bridge yields a brighter, more piercing harmonic.
- Practice the timing: The coordination between plucking and lifting is crucial. Start slowly and focus on producing a clear, sustained bell-like tone. Use a clean amp setting or acoustic guitar to hear the pure harmonic.
Common Variations
- Artificial harmonics: Unlike natural harmonics, these require fretting a note with one finger and then lightly touching the string 12 frets above the fretted note with another finger (usually the index finger of the picking hand) while plucking. This allows any fretted note to produce a harmonic.
- Pinch harmonics (squealies): A technique used primarily on electric guitar where the player’s thumb or pick catches the string immediately after plucking, creating a high-pitched harmonic. The picking hand must touch a node point, which varies depending on the fretted note.
- Tap harmonics: The picking hand taps the string directly over a fret wire (e.g., 12 frets above a fretted note) to sound the harmonic, often used in two-handed tapping styles.
- Harp harmonics: A cascading series of natural and artificial harmonics played in quick succession, creating a harp-like effect. Popularized by guitarists like Tommy Emmanuel.
- Violin/cello harmonics: On bowed string instruments, the player lightly touches the string at a node while bowing, producing a flutelike tone. Notation often uses a diamond note head.
Common Mistakes
- Pressing too hard: The most frequent error is pressing the string down to the fretboard, which kills the harmonic. The touch must be feather-light.
- Incorrect finger placement: The finger must be exactly over the fret wire, not in the middle of the fret. Even a millimeter off can mute the harmonic or produce a dull thud.
- Plucking too softly: Harmonics require a confident pluck to excite the overtone. A timid attack may only produce the fundamental.
- Not lifting quickly enough: If the fretting finger remains on the string after plucking, the harmonic will be damped. The lift must be instantaneous.
- Old or dead strings: Worn strings lose their ability to vibrate cleanly at high frequencies. Fresh strings make harmonics ring out more clearly.
- Ignoring intonation: On electric guitars, poor intonation can shift the node positions slightly, making harmonics sound out of tune. Ensure your guitar is properly set up.
Notable Examples in Songs
- “Nothing Else Matters” (Intro) – Metallica
- “Roundabout” – Yes
- “Red Barchetta” – Rush
- “Portrait of Tracy” – Jaco Pastorius
- “Ocean” – John Butler Trio
- “Classical Gas” – Mason Williams
FAQ
What is the difference between natural and artificial harmonics?
Natural harmonics are played on open strings by touching a node (e.g., 12th fret). Artificial harmonics require fretting a note and then touching a node 12 frets above the fretted note, allowing any pitch to be harmonic.
Why do my natural harmonics sound muted or dull?
Common causes include pressing too hard, not touching exactly over the fret wire, plucking too softly, or not lifting the fretting finger quickly enough. Old strings can also reduce clarity.
Can natural harmonics be played on any string instrument?
Yes, any string instrument with a fingerboard (guitar, violin, cello, bass, etc.) can produce natural harmonics, though the exact node positions vary with string length and tuning.
How do I notate natural harmonics in tablature?
In guitar tab, natural harmonics are usually written with the fret number inside angle brackets, like . Some tabs also include 'harm.' above the staff.
What are the most useful natural harmonics for beginners?
Start with the 12th, 7th, and 5th fret harmonics on all strings. These are the loudest and easiest to produce, and they form the basis for tuning and many songs.
Leave a Reply